PEMANTAUAN KUALITAS MIKROBIOLOGIS PADA PERMUKAAN MEJA KERJA PENGUJIAN LABORATORIUM MIKROBIOLOGI SEBELUM DI DESINFEKSI BERDASARKAN TOTAL PLATE COUNT DENGAN METODE SWAB
DOI:
https://doi.org/10.30605/biogenerasi.v10i2.5635Keywords:
Swab,Environmental monitoring,ContaminationAbstract
Microbiology laboratory environmental monitoring is an activity that must be considered to ensure that there is no contamination either directly or cross-contamination. Environmental monitoring can be carried out using the swab method in accordance with SNI 2332.3: 2015. This study shows that the sample preparation room has a high contamination rate exceeding the limits specified in SNI 2332.3: 2015. Contamination in the sample preparation room has a figure of 1.4 x 104 cfu / 100 cm2. Inoculation room 2 (LAF) has the lowest contamination rate, this is influenced by the pressure around the room which is useful for reducing contamination. This monitoring must be carried out periodically to ensure that the environmental conditions are clean and sterile, thereby reducing the possibility of contamination of products and test results.
Downloads
References
Atirah, N., & Liana, D. F. 2023. Gambaran Angka Bakteri Di Laboratorium Mikroskopik Fakultas Kedokteran Universitas Tanjungpura. Majalah Kedokteran Andalas, 46(2), 282–294.
Badan Standardisasi Nasional. 2015. SNI 2332.3:2015. In Badan Standardisasi Nasional (p. 11).
Badaring, D. R., W, M. F., & Bahr, A. 2020. Identifikasi Morfologi Mikroba Pada Ruangan. Prosiding Seminar Nasional Biologi Fmipa Unm: Inovasi Penelitian Biologi Dan Pembelajarannya Di Era Merdeka Belajar, 161-167.
BPOM. 2022. Peraturan Badan Pengawas Obat dan Makanan Nomor 18 Tahun 2022 tentang Pedoman Cara Pembuatan Obat yang Baik di Sarana Pengolahan Produk Berbasis Sel dan Jaringan Manusia (Issue 1, pp. 1–169).
Hafsan. 2014. Mikrobiologi Analitik. In fatmawati nur (Ed.), Alauddin University Press (Issue).
Khairi, A. N., & Wahyu, N. 2021. Analisis Potensi Cemaran Mikroba pada Beberapa Peralatan Produksi PT PIS dengan Metode Swab. Jurnal Ilmu Pangan Dan Hasil Pertanian, 5(2), 191–203.
Rosmania, R., & Yuniar, Y. 2021. Pengaruh waktu penyimpanan inokulum Escherichia coli dan Staphylococcus aureus pada suhu dingin terhadap jumlah sel bakteri di Laboratorium Mikrobiologi. Jurnal Penelitian Sains, 23(3), 117-124.
Sekartaji, A. T., & Erawati, E. 2022. Studi Analisis Angka Kuman Usap Lantai dan Dinding di Bangsal Flamboyan RSUD Dr. Moewardi. Prosiding Seminar Nasional Unimus, 5(1), 1341–1349.
Downloads
Published
How to Cite
Issue
Section
License
In submitting the manuscript to the journal, the authors certify that:
- They are authorized by their co-authors to enter into these arrangements.
- The work described has not been formally published before, except in the form of an abstract or as part of a published lecture, review, thesis, or overlay journal.
- That it is not under consideration for publication elsewhere,
- That its publication has been approved by all the author(s) and by the responsible authorities – tacitly or explicitly – of the institutes where the work has been carried out.
- They secure the right to reproduce any material that has already been published or copyrighted elsewhere.
- They agree to the following license and copyright agreement.
License and Copyright Agreement
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under Creative Commons Attribution License (CC BY 4.0) that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.